Order

Use Cases

Control solenoids, hydraulic valves, and work lights from your tractor's Virtual Terminal. Real-world examples for front loaders, implements, and more.

Solenoid valve on a snowplow implement
RETROFIT

Modernize an old implement. Run it from the cab.

Retrofit a seed drill, a multi-function trailer, or any analog machine into an ISOBUS-controlled one. Pre-wired Deutsch connectors on the implement side, standard ISOBUS on the tractor side.

See the plug-and-play kit
What you can control

8 channels. You decide what they switch.

Any ON/OFF load under 10A, switched from your tractor's display and joystick. Install it in the cab, on an implement, or anywhere with 12/24V power and ISOBUS.

12V hydraulic solenoid valve block mounted on a green agricultural implement with rubber hydraulic hoses and quick-couplers

Hydraulic solenoid valves

Front loader third function, diverter valves, implement valve blocks. Anything with a 12V ON/OFF solenoid coil.

LED work light mounted on a tractor hood bracket

Work lights & LED bars

Extra work lights, boom lights, cab lights. Switch them from the joystick — no new harness, no new switches.

Amber rotating beacon mounted on the roof of a tractor cab

Beacons, strobes & horns

Road beacons, warning strobes, rotating lights. Assign them to armrest buttons — no extra switches to mount.

Pneumatic solenoid valve block with push-fit air fittings on an agricultural implement frame

Pneumatic valves

Spreader gates, seed shut-offs, air valve blocks. Same 12V control, same joystick buttons.

12V electric linear actuator mounted on a green agricultural loader arm

Electric actuators

Linear actuators and small motors. Anything 12/24V pulling under 10A.

12V DC diaphragm pump with hose clamps mounted on an agricultural equipment frame

Pumps & fans

Wash pumps, transfer pumps, oil or liquid cooling fans. Assign each one to a joystick button — no toggle switch to wire in.

Use Cases

You decide what it controls. Diverter valves, grouped outputs, solenoids — wire it up however your setup needs it.

Diverter Valve Control

One hydraulic line, multiple functions. Switch solenoid-operated diverter valves from your joystick and direct flow where you want it.

Grouped Outputs

One button, multiple relays. Open a valve and turn on a work light with a single press.

Two Solenoids, Two Buttons

Control two solenoid valves from two buttons. Wire both, assign to your joystick, done.

Build Your Own Setup

Any implement. Any solenoid. Wire it to the module, connect to the tractor, and control it from the cab.

Cover Image for Front Loader Third Function

Front Loader Third Function

Add a third hydraulic function to your front loader with ISOBUS Block and a diverter valve. Control the solenoid from AUX-N buttons or the tractor screen — no switches to install in the cab.

Cover Image for Multi-Solenoid Implement Control

Multi-Solenoid Implement Control

Control implements with multiple solenoids using ISOBUS Block. Group outputs for synchronized operation, choose momentary or toggle modes. Works with snow plows, sprayers, seed drills, and custom hydr...

Cover Image for Modernizing Older Implements

Modernizing Older Implements

Make any older implement ISOBUS-compatible. Install ISOBUS Block on the implement, connect existing solenoids and lights, plug into any tractor's ISOBUS connector. One install — works with every tract...