Connecting to the Device

The ISOBUS Block creates its own WiFi network for testing outputs, diagnostics, and firmware updates. No internet connection is required. Button setup and AUX-N assignment happen on the tractor's Virtual Terminal, not over WiFi.

WiFi Network Details

Finding Your Device

Each ISOBUS Block has a unique network name based on its chip ID. Look for networks starting with Block_relay_ in your WiFi list.

If you have multiple devices, the last 3-4 characters of the network name identify each unit.

Connecting Steps

From a Smartphone

1. Open Settings > WiFi
2. Find and tap Block_relay_XXX
3. Enter password: 12345678 (or your custom password)
4. Wait for connection (may show "No internet" - this is normal)
5. Open browser and go to 192.168.4.1

From a Laptop/PC

1. Click WiFi icon in taskbar
2. Select Block_relay_XXX
3. Enter password: 12345678
4. Open browser and navigate to http://192.168.4.1

Connection Tips

• Stay within 10-15 meters of the device for best signal
• The antenna is inside the enclosure - metal obstructions may reduce range
• Only one device can be connected at a time for configuration
• Your phone may warn "No internet connection" - this is expected, stay connected

Troubleshooting

Can't find the network?

• Verify the device has power (check for LED activity)
• Move closer to the device
• Wait 10-15 seconds after power-on for WiFi to start

Password not working?

• Default password is: 12345678
• If you changed the password and forgot it, see WiFi Password Reset

Connected but can't access web page?

• Make sure you're going to http://192.168.4.1 (not https)
• Try disabling mobile data on your phone
• Clear browser cache and try again